DuraGraphix™ Vinyl BannerJet
|
Product Description:
|
DuraGraphix™ water resistant coating on scrim blockout vinyl. Vinyl can be sewn and grommeted. Base is flame retardant for indoor or outdoor use.
|
|
x
|
|
|
Suggested Uses:
|
Banners, Signs, P.O.P.
|
|
x
|
|
|
Product Code:
|
DGVBJ
|
|
x
|
|
|
|
Roll Dimensions:
|
Width (inches)
|
Length (feet)
|
|
On 2” cores unless noted.
|
24
|
40
|
|
|
36
|
40
|
|
|
42
|
40
|
|
|
44
|
40
|
|
|
50
|
40
|
|
|
53
|
40
|
|
|
24” x 5’ sample rolls or 8.5” x 11” sample sheets are available
|
|
x
|
|
|
Physical Properties:
|
Total Weight
|
507 g/m²
|
|
|
Thickness
|
17 mil
|
|
|
Opacity
|
100%
|
|
|
Gloss @ 60°
White Point
|
2.8
124
|
|
|
Base
|
13 oz. scrimmed vinyl with blockout
|
|
|
Tensile Strength (lb/in)
|
200 MD; 135 CD
|
|
|
Tear Strength (lbs)
|
5.9 MD; 5 CD
|
|
|
Burst Strength (psi)
|
260
|
|
|
Lamination
|
Pressure Sensitive, Spray, Thermal, Liquid
For best results, please ensure that the print is encapsulated or the edge is sealed to prevent wicking into the print.
|
|
|
Finish
|
Matte
|
|
|
Water Resistant
|
Yes
|
|
|
Flame Resistant (sec/in)
|
1.7/4.5
|
|
x
|
|
|
Ink Compatibility:
|
Aqueous Pigment (recommended for image permanence), Ultrachrome™, Dye-based, Eco-Solvent
|
|
x
|
|
|
NOTE:
|
This Product Data Sheet is intended to be used as a guideline only. Before using our print media, please verify that it is suitable for use with your printer. IJ Technologies will not assume liability for non-performance of the print media resulting from changes beyond our control in printing inks and/or printers.
Specifications are subject to change without notice. The product will be replaced if defective. No other liability will be accepted and all other warranties and conditions statutory, expressed or implied are excluded.
|
|
x
|
|
 |
 |
 |
|
|
|
Home
|
About Us |
Contact Us |
Privacy policy |
Site map