DG Poly Banner II

Product Description:

A tough polypropylene based banner material for outdoor display.

Suggested Uses:

Outdoor Signs, Banners, Posters, Pull-Up Banner Displays

Product Code: DGVP

Roll Dimensions:

* one 24×10 sample roll per customer location

Physical Properties:

Total Weight – 270 g/m²
Thickness – 10 mil
Opacity – 86%
Gloss @ 60° – 2.7
White Point – 122
Base – 8 mil polyethylene
Tensile Strength (N/mm²) – 45 MD; 38 CD
Tear Strength (N/mm²) – 140 MD; 170 CD
Lamination – Pressure Sensitive, Spray, Thermal, Liquid. For best results, please ensure that the print is encapsulated or the edge is sealed to prevent moisture wicking into the print.
Finish – Matte
Water Resistant – Yes

Ink Compatibility:

Pigment, Dye, UltraChrome, Solvent

For outdoor display, the use of pigment inks is recommended for fade and water resistance.

Technical Info:

Product Data Sheet (PDF format)

This Product Data Sheet is intended to be used as a guideline only. Before using our print media, please verify that it is suitable for use with your printer. IJ Technologies will not assume liability for non-performance of the print media resulting from changes beyond our control in printing inks and/or printers. Specifications are subject to change without notice. The product will be replaced if defective. No other liability will be accepted and all other warranties and conditions statutory, expressed or implied are excluded.